Digital Lecture 1

Aidan Singh

https://www.tinkercad.com/things/dcMZmXhofvR

5 “Unique” Changes:

1. This circuit is mainly different within the code when the button is pushed. When the button held down, the two white lights flash once, pause, flash twice fast, pause, flash twice three times, pause, and so on. If the button is released and pressed again, the counter starts at 1 again.
2. I found that it was much easier to see the flashing if the two lights weren’t blue and green, rather white. Those colors seem to be worse for fast flashing/blinking.
3. I also changed the color of some wires and the other LED just to familiarize myself with that function, with no other purpose.
4. I also messed with the purple wire to familiarize myself with the location/curve function with no other purpose.
5. Lastly I moved the resistor with no purpose.